Remove debris dust and loose dirt

Apply cleaner solution (warm water with detergent of ph 8 to 10)

Leave the solution on the floor for several minutes

Scrub with synthetic brush or deck scrubber

Remove cleaning solution using mop and twin bucket (to avoid dirt redistribution)

Mop rinse with clean warm water

Allow to dry before trafficking the area

Remove large debris and vacuum dirt and dust

Apply cleaner solution (warm water with detergent of ph 8 to 10)

Leave the solution on the floor for several minutes

Machine scrub using synthetic pad

Wet vacuum loosened dirt

Rinse with warm clean water

Vacuum dry

Clean your floor covering regularly

Follow the flooring and cleaner manufacturer recommendations

Remove stains immediately to limit risk of permanent damage

Remove shoe scuffing immediately by using a dry scrubbing brush (no water or liquids)

Avoid contact with products likely to migrate into the vinyl and stain it permanently (ball point ink, asphalt, pine oil based cleaner, lipstick, rubber tires, strong dyes etc.)

Avoid polish and other surface treatments as they are likely to reduce dramatically the slip resistance properties of your product

Use only recommended cleaning liquids in the correct concentration

Do not mix cleaning liquids

Protect newly laid floor from other trades using suitable protective covering

FloorXL technical support

• Europe +44 7912 580 676

• Asia Pacific +61 408 917 145

• E-mail: stephanel@floorxl.com

Suppliers of suitable cleaning products:

• Prochem Europe Ltd
  Tel: +44 (0) 208 974 1515;
  Fax: +44 208 974 1511;
  E-mail: sales@prochem.co.uk

• SC Johnson
  Tel: +44 1276 63456;
  Fax: +44 1276 852308